This past week our direct supervisor (Bill Hanson) and an Architect (Tim Hunsicker) that has started to work for the Project Office were able to make a visit to the project. It was good to finally meet with Bill for the first time in person. We have been talking on the phone, Skype and email for over two years now. It was a good time to review the project status, budget, funding, design, safety, etc.
Holly, Tim & Bill taking a photo with the new building project
Jon reviewing the plans with Tim & Bill
Bill, Jon, Holly & Tim in front of the new hospital project
Out for a half round of golf (next to the airport so we arrived a bit early for the flight to get a few holes in)
Bill, Brett, Tim & Jon enjoying a fun game of golf.
Quality management is a big part of our job here in Bangladesh as project managers for a large construction project. From the supply of raw materials such as sand, stone, cement, and bricks to pipe, electrical components, doors, and windows to the installation of these items and construction of structural slabs, columns and brick walls. It is a constant theme. It particularly can be a challenge in a country where this kind of thing is widespread.
Actual Men's Size Medium Shirt with RL insignia, Oshkosh tag - made by....not sure
not real Blu-ray - copies of movies sold at many shops
not real Nike - cricket bat
Pepsi, Coca-Cola and a nice Nic Nac...
not real Doc (I was just observing but unfortunately this is a real issue in Bangladesh)
Well I recently played victim to poor product quality when I purchased a couple packs of balloons. It even had an English warning that I missed "Fake Product with Bad Quality & High Defects". While trying to blow a balloon just a little bit bigger it exploded on my eye. I'm fine but it was sore for a few days. I wasn't a big fan before this event, but I think I'll be swearing off balloons forever now....
We celebrated five years of marriage last weekend (November 27). Twelve years since we met, seven years together, lots of adventures along the way, such as living and working in Bangladesh. More to come!
Couple Photos were taken by Yorke Photography - More Here
We were able to have a bit of extra fun last weekend with a boat trip down the river with friends to a sandy section of Maheshkali island, a progressive American thanksgiving dinner, and a game of ultimate (frisbee).
Our [Mostly] Secluded Beach Destination
Jon running through deep mud to reach the "bridge to nowhere" (no road or on-ramp)
Carrie, Shannon and Jon contemplating the plunge with a curious onlooker
They went for it. Extra thrills when the Sharwar (women's long top) covers your face.
And now back to the main event five years ago........so many memories jogged by browsing our photos.....here are just a couple........
The moment Jon realized he turned on the water with his back during a photo session before the ceremony- I love his face.
We had the honor of being married by this wonderful man - the late Lynn Erskine
The shuttering for the First Floor East Slab is in the process of
being removed and moved up a level to start preparing for the Second
Floor East Slab (Male ward, Private/Semi private rooms & Nursing station). The goal is to be ready to start slab casting on December
View from on top the existing hospital roof - Dec 3, 2014
Setting up the shuttering for the second floor slab (East)
power in Bangladesh is sporadic at the best of times with regular load
shedding (power outages) due to the fact that electrical demand is much
greater than the available supply, especially during the hot seasons. A
year ago November the hospital was able to obtain a priority line that
has reduced load shedding on average a couple hours per day which has
been a great blessing. Even with this new priority line voltage
conditions at the hospital have been consistently low (regular brownouts
with voltage as low as 150-180v when designed to receive 220v). When
the voltage drops below a certain point the campus generators would have
to be turn on so that medical equipment, hospital compressors and even
florescent light would work properly. In order to fix this issue a new
voltage regulator was purchased for the hospital which will correct the
worst of brownouts and supply the hospital with required voltages. This
new AVR is of special importance to the new hospital building as the
proposed Oxygen & Suction machines, Elevators, Chiller, Medical
equipment, etc. all require stabilized voltage. Over the past month this
new unit has been keeping the voltage very stable. (One can not tell
the difference from the generator supply or grid supply vs previously
when the generator was on lights and fans etc. all ran about 25%
Inside the new voltage regulator panel
Energypac and the workshop connecting the lines back into the existing transformer
AVR, Transformer & Generator Shed behind
Gary and the workshop finishing the connections on the AVR